Sangoma VoiceTimeのインストール方法
目次
対象としたリビジョンの比較
...
wanpipe_voicetime-modules-2.6.9-89.EL42.EL-1.0.9-2
wanpipe_voicetime-modules-2.6.9-89.ELsmp42.ELsmp-1.0.9-2
...
[root@trixboxNNNNNN ~]#yum update FONdetect[root@trixboxNNNNNN ~]#yum install wanpipe_voicetime-modules-2.6.9-89.EL42.ELwanpipe_voicetime-modules-2.6.9-89.ELsmp42.ELsmp
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for wanpipe_voicetime-modules-2.6.9-42.ELsmp to pack into transaction set.
wanpipe_voicetime-modules 100% |=========================| 1.7 kB 00:00
---> Package wanpipe_voicetime-modules-2.6.9-42.ELsmp.i386 0:1.0.9-2 set to be updated
---> Downloading header for wanpipe_voicetime-modules-2.6.9-42.EL to pack into transaction set.
wanpipe_voicetime-modules 100% |=========================| 1.7 kB 00:00
---> Package wanpipe_voicetime-modules-2.6.9-42.EL.i386 0:1.0.9-2 set to be updated
--> Running transaction check
Dependencies Resolved
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
wanpipe_voicetime-modules-2.6.9-42.EL i386 1.0.9-2 fonality 79 k
wanpipe_voicetime-modules-2.6.9-42.ELsmp i386 1.0.9-2 fonality 82 k
Transaction Summary
=============================================================================
Install 2 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 161 k
Is this ok [y/N]: y
Downloading Packages:
(1/2): wanpipe_voicetime- 100% |=========================| 82 kB 00:00
(2/2): wanpipe_voicetime- 100% |=========================| 79 kB 00:00
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: wanpipe_voicetime-modules-2. ######################### [1/2]
WARNING: /lib/modules/2.6.9-42.EL/kernel/drivers/usb/cl***/usb-midi.ko needs unknown symbol unregister_sound_midi
WARNING: /lib/modules/2.6.9-42.EL/kernel/drivers/usb/cl***/usb-midi.ko needs unknown symbol register_sound_midi
Installing: wanpipe_voicetime-modules-2. ######################### [2/2]
WARNING: /lib/modules/2.6.9-42.ELsmp/kernel/drivers/usb/cl***/usb-midi.ko needs unknown symbol unregister_sound_midi
WARNING: /lib/modules/2.6.9-42.ELsmp/kernel/drivers/usb/cl***/usb-midi.ko needs unknown symbol register_sound_midi
Installed: wanpipe_voicetime-modules-2.6.9-42.EL.i386 0:1.0.9-2 wanpipe_voicetime-modules-2.6.9-42.ELsmp.i386 0:1.0.9-2
Complete!
注意: usb-midi.koエラーが表示されますが、これは通常の動作でPBXの動作に問題はありません。
設定手順:
システムにモニタとキーボードを接続して以下のメニューにアクセスするか、SSHで以下のコマンドを投入すると同様のシステム設定画面にアクセスできます。:
perl /var/adm/bin/ip.pl -i
Network Config/Troubleshooter
1. Set IP Address of this system
2. Show IP Address of this system
3. Run the PING utility
4. Run the TRACEROUTE utility
5. Display the DNS Nameserver configuration
6. Display the route table
7. Display the ARP table
8. Show Analog Phone Line voltage levels
9. Show T1 Status
10. Show Active Calls
11. Set 'root' p***word
12. Reboot system
13. Re-scan for PSTN cards
14. Scan for new phones
Q. Quit and exit this tool
Selection: 13
13番を選択し、trixboxProにUT50を検出させます。
This option will erase and recreate all PSTN card configurations.
Are you sure you want to re-detect PSTN cards? [y/n]: y
WANPIPE USB Dummy Timer Interface
Starting PBXtra Core service: [ OK ]
Starting FONmon service: [ OK ]
これでSangoma VoiceTime UT50はインストールされました。正しくインストールされたかを確認するためにSSHでシステムにアクセスし、以下のコマンドを投入します。:
dmesg |grep USB
以下のような出力を確認できるはずです。（完全に同じではないかもしれません。システムによって異なります）:
wanpipe_voicetime: Loading WANPIPE VoiceTime (USB) Driver - v1.0.9 wanpipe_voicetime: Probing WANPIPE VoiceTime (USB) device on 2 ...
タイミングソースのテストを行います。以下のコマンドを実行してください。:
。:（trixboxPro Ver4.Xの場合）
zttest
trixboxProVer5.2の場合は、
dahdi_test
以下のような出力があるはずです。:
Opened pseudo zap interface, measuring accuracy... 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 100.000000% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793%
これは、タイミングソースの精確さを示しています。CTRL+Cを押してテストを終了すると、以下のようなサマリーが出力されます:
--- Results after 64 passes --- Best: 100.000000 -- Worst: 99.987793 -- Average: 99.989319
平均99.989%であれば、タイミングソースデバイスは正常に動作しています。!
...
2009年 5月 18日, 07:10からのバージョン
...
wanpipe_voicetime-modules-2.6.9-42.EL-1.0.9-2
wanpipe_voicetime-modules-2.6.9-42.ELsmp-1.0.9-2
...
[root@trixboxNNNNNN ~]#yum update FONdetect[root@trixboxNNNNNN ~]#yum install wanpipe_voicetime-modules-2.6.9-42.ELwanpipe_voicetime-modules-2.6.9-42.ELsmp
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for wanpipe_voicetime-modules-2.6.9-42.ELsmp to pack into transaction set.
wanpipe_voicetime-modules 100% |=========================| 1.7 kB 00:00
---> Package wanpipe_voicetime-modules-2.6.9-42.ELsmp.i386 0:1.0.9-2 set to be updated
---> Downloading header for wanpipe_voicetime-modules-2.6.9-42.EL to pack into transaction set.
wanpipe_voicetime-modules 100% |=========================| 1.7 kB 00:00
---> Package wanpipe_voicetime-modules-2.6.9-42.EL.i386 0:1.0.9-2 set to be updated
--> Running transaction check
Dependencies Resolved
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
wanpipe_voicetime-modules-2.6.9-42.EL i386 1.0.9-2 fonality 79 k
wanpipe_voicetime-modules-2.6.9-42.ELsmp i386 1.0.9-2 fonality 82 k
Transaction Summary
=============================================================================
Install 2 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 161 k
Is this ok [y/N]: y
Downloading Packages:
(1/2): wanpipe_voicetime- 100% |=========================| 82 kB 00:00
(2/2): wanpipe_voicetime- 100% |=========================| 79 kB 00:00
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: wanpipe_voicetime-modules-2. ######################### [1/2]
WARNING: /lib/modules/2.6.9-42.EL/kernel/drivers/usb/cl***/usb-midi.ko needs unknown symbol unregister_sound_midi
WARNING: /lib/modules/2.6.9-42.EL/kernel/drivers/usb/cl***/usb-midi.ko needs unknown symbol register_sound_midi
Installing: wanpipe_voicetime-modules-2. ######################### [2/2]
WARNING: /lib/modules/2.6.9-42.ELsmp/kernel/drivers/usb/cl***/usb-midi.ko needs unknown symbol unregister_sound_midi
WARNING: /lib/modules/2.6.9-42.ELsmp/kernel/drivers/usb/cl***/usb-midi.ko needs unknown symbol register_sound_midi
Installed: wanpipe_voicetime-modules-2.6.9-42.EL.i386 0:1.0.9-2 wanpipe_voicetime-modules-2.6.9-42.ELsmp.i386 0:1.0.9-2
Complete!
注意: usb-midi.koエラーが表示されますが、これは通常の動作でPBXの動作に問題はありません。
設定手順:
システムにモニタとキーボードを接続して以下のメニューにアクセスするか、SSHで以下のコマンドを投入すると同様のシステム設定画面にアクセスできます。:
perl /var/adm/bin/ip.pl -i
Network Config/Troubleshooter
1. Set IP Address of this system
2. Show IP Address of this system
3. Run the PING utility
4. Run the TRACEROUTE utility
5. Display the DNS Nameserver configuration
6. Display the route table
7. Display the ARP table
8. Show Analog Phone Line voltage levels
9. Show T1 Status
10. Show Active Calls
11. Set 'root' p***word
12. Reboot system
13. Re-scan for PSTN cards
14. Scan for new phones
Q. Quit and exit this tool
Selection: 13
13番を選択し、trixboxProにUT50を検出させます。
This option will erase and recreate all PSTN card configurations.
Are you sure you want to re-detect PSTN cards? [y/n]: y
WANPIPE USB Dummy Timer Interface
Starting PBXtra Core service: [ OK ]
Starting FONmon service: [ OK ]
これでSangoma VoiceTime UT50はインストールされました。正しくインストールされたかを確認するためにSSHでシステムにアクセスし、以下のコマンドを投入します。:
dmesg |grep USB
以下のような出力を確認できるはずです。（完全に同じではないかもしれません。システムによって異なります）:
wanpipe_voicetime: Loading WANPIPE VoiceTime (USB) Driver - v1.0.9 wanpipe_voicetime: Probing WANPIPE VoiceTime (USB) device on 2 ...
タイミングソースのテストを行います。以下のコマンドを実行してください。:
zttest
以下のような出力があるはずです。:
Opened pseudo zap interface, measuring accuracy... 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 100.000000% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793%
これは、タイミングソースの精確さを示しています。CTRL+Cを押してテストを終了すると、以下のようなサマリーが出力されます:
--- Results after 64 passes --- Best: 100.000000 -- Worst: 99.987793 -- Average: 99.989319
平均99.989%であれば、タイミングソースデバイスは正常に動作しています。!
...
現在の版
...
wanpipe_voicetime-modules-2.6.9-89.EL-1.0.9-2
wanpipe_voicetime-modules-2.6.9-89.ELsmp-1.0.9-2
...
[root@trixboxNNNNNN ~]#yum update FONdetect[root@trixboxNNNNNN ~]#yum install wanpipe_voicetime-modules-2.6.9-89.EL wanpipe_voicetime-modules-2.6.9-89.ELsmp
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for wanpipe_voicetime-modules-2.6.9-42.ELsmp to pack into transaction set.
wanpipe_voicetime-modules 100% |=========================| 1.7 kB 00:00
---> Package wanpipe_voicetime-modules-2.6.9-42.ELsmp.i386 0:1.0.9-2 set to be updated
---> Downloading header for wanpipe_voicetime-modules-2.6.9-42.EL to pack into transaction set.
wanpipe_voicetime-modules 100% |=========================| 1.7 kB 00:00
---> Package wanpipe_voicetime-modules-2.6.9-42.EL.i386 0:1.0.9-2 set to be updated
--> Running transaction check
Dependencies Resolved
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
wanpipe_voicetime-modules-2.6.9-42.EL i386 1.0.9-2 fonality 79 k
wanpipe_voicetime-modules-2.6.9-42.ELsmp i386 1.0.9-2 fonality 82 k
Transaction Summary
=============================================================================
Install 2 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 161 k
Is this ok [y/N]: y
Downloading Packages:
(1/2): wanpipe_voicetime- 100% |=========================| 82 kB 00:00
(2/2): wanpipe_voicetime- 100% |=========================| 79 kB 00:00
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: wanpipe_voicetime-modules-2. ######################### [1/2]
WARNING: /lib/modules/2.6.9-42.EL/kernel/drivers/usb/cl***/usb-midi.ko needs unknown symbol unregister_sound_midi
WARNING: /lib/modules/2.6.9-42.EL/kernel/drivers/usb/cl***/usb-midi.ko needs unknown symbol register_sound_midi
Installing: wanpipe_voicetime-modules-2. ######################### [2/2]
WARNING: /lib/modules/2.6.9-42.ELsmp/kernel/drivers/usb/cl***/usb-midi.ko needs unknown symbol unregister_sound_midi
WARNING: /lib/modules/2.6.9-42.ELsmp/kernel/drivers/usb/cl***/usb-midi.ko needs unknown symbol register_sound_midi
Installed: wanpipe_voicetime-modules-2.6.9-42.EL.i386 0:1.0.9-2 wanpipe_voicetime-modules-2.6.9-42.ELsmp.i386 0:1.0.9-2
Complete!
注意: usb-midi.koエラーが表示されますが、これは通常の動作でPBXの動作に問題はありません。
設定手順:
システムにモニタとキーボードを接続して以下のメニューにアクセスするか、SSHで以下のコマンドを投入すると同様のシステム設定画面にアクセスできます。:
perl /var/adm/bin/ip.pl -i
Network Config/Troubleshooter
1. Set IP Address of this system
2. Show IP Address of this system
3. Run the PING utility
4. Run the TRACEROUTE utility
5. Display the DNS Nameserver configuration
6. Display the route table
7. Display the ARP table
8. Show Analog Phone Line voltage levels
9. Show T1 Status
10. Show Active Calls
11. Set 'root' p***word
12. Reboot system
13. Re-scan for PSTN cards
14. Scan for new phones
Q. Quit and exit this tool
Selection: 13
13番を選択し、trixboxProにUT50を検出させます。
This option will erase and recreate all PSTN card configurations.
Are you sure you want to re-detect PSTN cards? [y/n]: y
WANPIPE USB Dummy Timer Interface
Starting PBXtra Core service: [ OK ]
Starting FONmon service: [ OK ]
これでSangoma VoiceTime UT50はインストールされました。正しくインストールされたかを確認するためにSSHでシステムにアクセスし、以下のコマンドを投入します。:
dmesg |grep USB
以下のような出力を確認できるはずです。（完全に同じではないかもしれません。システムによって異なります）:
wanpipe_voicetime: Loading WANPIPE VoiceTime (USB) Driver - v1.0.9 wanpipe_voicetime: Probing WANPIPE VoiceTime (USB) device on 2 ...
タイミングソースのテストを行います。以下のコマンドを実行してください。:（trixboxPro Ver4.Xの場合）
zttest
trixboxProVer5.2の場合は、
dahdi_test
以下のような出力があるはずです。:
Opened pseudo zap interface, measuring accuracy... 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 100.000000% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793%
これは、タイミングソースの精確さを示しています。CTRL+Cを押してテストを終了すると、以下のようなサマリーが出力されます:
--- Results after 64 passes --- Best: 100.000000 -- Worst: 99.987793 -- Average: 99.989319
平均99.989%であれば、タイミングソースデバイスは正常に動作しています。!
...
Powered by MindTouch Core