このページは編集できません。

Audiocodes MP-124FXSとtrixboxProの接続設定

対象としたリビジョンの比較

Admin によって 2009年 11月 23日, 22:18 に変更された版を Admin によって 2012年 1月 18日, 13:56 に変更された現在の版と比較。

他の変更:

/body/p[8]/span/a/@class: ~~" external"~~ ⇒ "external"

2009年 11月 23日, 22:18からのバージョン

Admin(禁止)で変更されたリビジョン

Configuring an Audiocodes MP-124 FXS gateway with trixbox Pro and PBXtra

Audiocodes MP-124 architecture.jpg

Device: Audiocodes MP-124 FXS
Firmware version: 5.40A.015.004

File:Users/kodamakyosuke/Library/Caches/TemporaryItems/msoclip1/01/clip_image004.jpg

Here are the step by step instructions for setting up a brand new Audiocodes
FXS gateway for use with trixbox Pro or PBXtra:

Connect the gateway to a network switch and connect a computer to the same
switch. Then configure the IP address of the computer to 10.1.10.2. Then run
your web browser and point it to http://10.1.10.10 and login using the
information below.

Default IP address: 10.1.10.10
Default user name: Admin
Default password: Admin

Goto "Quick Setup" and change the following:
IP Address => Set to the new IP address of the AudioCodes gateway
Subnet Mask => Set to the correct netmask for your local network
Default Gateway Address => Set to the correct gateway IP address for your
local network
Working With Proxy => Set to "Yes"
Proxy IP Address => Set to the IP address of the trixbox Pro or PBXtra server
Enable Registration => Set to "Enable"

Restart the gateway then log back in using the new IP address.

Goto Protocol Configuration -> Protocol Definition -> Proxy & Registration
Registrar IP Address => Set to the IP address or FQDN of the trixbox Pro or PBXtra server
Registration Time => Set to "60"
Subscription Mode => Set to "Per Endpoint"
Registration Mode => Set to "Per Endpoint"

File:Users/kodamakyosuke/Library/Caches/TemporaryItems/msoclip1/01/clip_image006.jpg

Goto Protocol Management -> Protocol Definition -> Coders
Add coders as needed You need to set at least G.711U-law

File:Users/kodamakyosuke/Library/Caches/TemporaryItems/msoclip1/01/clip_image008.jpg

Goto Protocol Configuration -> Endpoint Settings -> Authentication
Set SIP username and password for each port (typically, these will be SOFTPHONEXXX accounts)

Goto Protocol Management -> Endpoint Phone Numbers
The ‘Phone Number’ in this table is the SIP user name given to trixbox Pro or PBXtra, so you will need to use your SIP accounts here:

File:Users/kodamakyosuke/Library/Caches/TemporaryItems/msoclip1/01/clip_image012.jpg

Click ‘Submit’ followed by ‘Register.’

Your AudioCodes gateway is now ready.

In trixbox Pro or PBXtra, you need to add an extension and then assign it to the appropriate SOFTPHONEXXX device.

File:Users/kodamakyosuke/Library/Caches/TemporaryItems/msoclip1/01/clip_image014.jpg

Required fields:

Extension number: (can be whatever)
Description: (can be whatever)
First / Last Name: (can be whatever)
Web Username: SERVERID_EXTENSIONNUMBER (should be server ID underscore extension number)
Web Password: (can be whatever, but should follow strong password rules)
Phones / Devices: (select a free SOFTPHONEXXX account)

Voicemail Box: (should be set equal to the extension number)
Voicemail Password: (can be whatever)

。

現在の版